The new Mil-tek XP100S Offshore Waste Compactor is a small, stainless steel waste compactor ideal for small, cramped locations such as offshore platforms. An elongated cylinder compacts a large volume of waste by a factor of up to 10:1, within a small footprint area.
Perfect for demanding maritime environments, the XP100S Waste Compactor provides a clean, efficient and economical method for managing mixed waste. Full bags are placed straight into the drum, ensuring fluids and smells remain contained. Its stainless-steel, air-powered construction prevents corrosion and removes the possibility of oil leakage.
Pressure
Noise level
1500 kg at 5 bar
< 70 db (A)
Height
1970 mm
Width
670 mm
Depth
704 mm
Weight
120 kg
Height
600 mm
Diameter
450 mm
Weight
< 50 kg
Certifications
CE, AS/NZ 4024.1 & UKCA
The Mil-tek X-Press 100S Offshore Waste Compactor is a micro size waste compactor ideal for offshore locations such as platforms and rigs. As it is stainless steel, it can be seamlessly installed in kitchens or food preparation areas and the small footprint size of just 52cm2 ensures that it can be installed without major disruption.
The Offshore Waste Compactor is powered exclusively by compressed air, so can be installed indoors and in clean, working environments. It is free from hydraulic oil or other contaminants.
For offshore environments, waste compaction is vital. By installing the XP100S Compactor inside a working environment such as a food preparation area, you create a seamless process from waste create to waste disposal.
The elongated cylinder of the XP100S Compactor allows for more compaction with each cycle, creating densely compacted bags of waste up to 50 kg in weight. This further minimizes the amount of space required to store waste. The longer cylinder also uses less power with each stroke, and can run on as little as 2 bars of pressure.
The key to installation is placing the machine in an optimal location. A Mil-tek consultant can advise you on this. The machine can be fastened to walls or floors.
Fill the wagon with waste. Closing the lid activates the pressing cycle. To open, simply lift the lid and wait for the plate to return. Repeat this process until the wagon is full.
To empty, simply release the handle, wait for the pressing plate to return and roll out the wagon. Bags can be sealed using X-Press Ties and a Mil-tek Bag Strapper..
The X-Press Wire Ties and Bag Strapper will seal most odours inside the bag, allowing for convenient storage offshore. Additional wagons can be provided to simplify the changeover process.
What are the benefits of a pneumatic waste compactor over a hydraulic waste compactor?
Pneumatic compactors use far less energy to run. Mil-tek’s patented ECO-Drive system applies constant downward pressure using the available power, thereby further compacting waste without using additional energy. Pneumatic machines are also quieter in operation and contain no inherent risk of oil contamination or electrical fire.
Can a Mil-tek Offshore Waste Compactor be installed inside a kitchen where food is being prepared?
Yes you can. The Offshore Waste Compactor is designed for exactly this. It has a stainless steel frame meaning it is ideal for kitchens, it is low on both noise and energy usage, and it’s small size further enhances its flexibility.
How does the XP100S Compactor assist with offshore waste management?
In a word: compaction. Waste takes up room. It’s a bulky nuisance and in offshore environments, space is key. With a Mil-tek 100S Offshore Waste Compactor, you can compact non-recyclable waste by a factor of 10:1. freeing up precious space.
What level of service and maintenance does the XP100S require?
Like most good machines, we recommend an annual service by a certified Mil-tek technician to ensure a healthy and long-lasting machine. In Offshore environments, this might not be practically possible, so be sure to speak to a consultant about service options and spare parts kits when you buy.
The XP100S Waste Compactor is an ideal solution for any size of professional kitchens. The small footprint allows it to be easily installed in compact locations, and as it is both stainless steel and air-powered, there is no risk of oil contamination or rust.
Full bags of rubbish can be placed directly into the Offshore Waste Compactor, keeping odours and fluids inside the drum to maintain a high standard of cleanliness and hygiene.
Waste Compactors are ideal on commercial ships help to minimize the volume of waste as well as freeing up storage space. Mil-tek has a range of compacting machines suitable for such a task, include free and fixed wagon models.
Depending on the size and scale of the operation, a Mil-tek waste management consultant can help to find the right solution.
Offshore platforms rely on safe, hazard-free working environments and strategic use of space in order to safely operate.
A Mil-tek XP100S Offshore Waste Compactor is perfectly suited for such an environment as it bears no inherent hazard risk and has a floor-space footprint of less than 52cm2.
XP100S Waste Compactor
